Check back regularly or subscribe for updates. Email us at jandkaudiodesign@gmail.com, or fill in the form on the left.
Showing posts with label Order Process. Show all posts
Showing posts with label Order Process. Show all posts

Friday, April 2, 2021

Custom order lead time

Dear beloved customers, we are officially increasing our custom order lead times to about 6-8 weeks due to our manufacturing lines being overloaded with OEM orders. 

Orders will still be processed according to the time they are received. Just that OEM orders are large and will take quite some time to be completed, and therefore those that come after it will be impacted. We have been seeing quite a number of large OEM orders and do not see them subsiding any time now. 

We hate to say that but it is hard to get experienced hires to help with production. We are planning for hires but it won't be so soon before they can join the workforce since they would need to be fully trained first. 

We are working our best to get the orders moving. If you plan to order something from us, please plan ahead of time and order early.

Kindly be informed. 

Thousand apologies.

J&K Audio Design

3/4/2021

Sunday, April 26, 2020

VA versus WATT

Often users ask us, how do I estimate the size required for the power transformers the circuit requires? How do I know if the power transformer size is sufficient for my circuit, for my amplifier or for my equipment? 

To them, it is always Watt that they heard mostly and learnt in secondary school, or even university. How do they use Watt versus VA? What is the best method to power transformers? What are the differences between VA and Watt? Some often see that we usually up-rate the transformers per the Vdc and Idc they use on their tube amplifier and they wonder why. 

How do I properly size my power transformers? How do I properly size my isolation transformer? 

First, we've to know what is the distinction between VA (Volt-Amp) and Watt. For equipment, the power consumption, or the actual power drawn by the equipment, is usually expressed in Watts. For transformers, usually they are rated in VA, which is also known as "apparent power", and is simply Vac x Iac. 

For resistive loads, such as bulbs with filament, heater with heating elements, and many more, the VA rating and Watt rating are the same - this is because the "Power Factor" is 1.0. For power supplies with capacitor-input, choke input supply, switch mode power supply (SMPS) and etc, the "Power Factor" is <1.0, such as 0.6 - 0.8, and therefore the VA rating and Watt rating will be different. Google for "power factor" if you're unsure what it is - we will postpone this for another article - hold on first. 

The Watt rating has to be divided by the "Power Factor" to get the actual VA rating required for the equipment in use. Or, the VA rating must be multiplied by the "Power Factor" to get the Watt rating.

Alright, enough with the theory, cut the crap, how do I order the d*mn transformer? 

Ok, ok, here's the simplified version, easy for non-technical people to follow. It's not super accurate, but is good enough for ordering use: 

Example #1: Consider the case of a equipment that consumes 260W from the wall on average. 

If we conservatively assume (yes, assume, since we do not know what's inside, we will take the worst case) 0.6 Power Factor, then the calculation would be as follow for the transformer VA to order: 

VA = 260W / 0.6 = 433VA

(Some will use rule of thumb of doubling the VA required versus the power consumption in Watts.) 

I would expect users to do some additional de-rating as well since transformer is not a perfect device - there may be losses. Also, if it is an amplifier, then the power consumption may actually be more since amplifier is dynamic, drawing different power at different point of time due to the volume versus music nature, which is dynamic and unpredictable. Therefore, double or triple of that is nothing surprising for amplifiers. 

*** If you prefer cool-running transformers, de-rate it further - do note that de-rating requires readjustment of the primary/secondary ratio since the secondary voltage will be higher than normal when under-load. *** Inform us if so when you're ordering, so that we can set the right voltage for you. 

Example 2: Order power transformer for an amplifier. Assuming you need Vdc of 400V at Idc of 200mA, using a bridge with capacitor input power supply (important note: different circuit calls for different formula). 

Vac = V-average-dc x 0.9 = 360Vac
Iac = Idc x 1.61 = 0.322A
VA = Vac x Iac = 116VA 

If you do not know the calculation method, you can go for simple calculation:

P in Watts = Idc x Vdc = 0.2 x 400 = 80W
Power factor = 0.6 
VA = 80W / 0.6 =  133VA

Above is just for a single winding. If there are multiple windings in a power transformer, add them all up, and add additional margins for multiple windings since efficiency will drop further with more windings in a single transformer. 

Some will use rule of thumb (again) of doubling the power (Watt) required for the VA rating, for a quick check. 

Do not forget to take losses into consideration, which is not included in this guide, especially tube rectifier / diode drops. D.C. regulator requires voltage margin for stable operations too and is dependent on the type of circuit used. Also, consider mains voltage drop/hike too in your calculation. Some will add additional buffer for lower operating temperature since there shall be copper losses and core losses that will generate heat and cause temperature to rise. 

Alright, here's your calculation example for how to order a power transformer, and how to differentiate VA and Watts during transformer ordering. Keep this in mind when you order. If you do not know how to calculate, let us know and we can help you estimate. 

J&K Audio Design
26/4/2020  





:










Sunday, February 2, 2020

Corona Virus


Some states or regions in China, including places where some of our raw materials vendors are located, were mandated by the Chinese Government to remain close until 10th February, 2020. This is to prevent wide spread of the Corona virus, and is one of the precautionary measures to avoid further spread of the disease and threat to the nations.

This has affect the continuous supply of raw materials needed to produce our products. This may have some impact to the production and may delay delivery of some shipments. We are could and are still in contact with the raw materials vendors for the latest update of the situation.

As of now, most of our raw materials vendors will resume production on 10th February, 2020. Given the uncertainty of this matter, we’re still actively monitoring the situation.

Kindly contact us if you’ve any concerns. Thousand apologies for the inconveniences caused.

Tuesday, October 1, 2019

J&K lead time

Hi guys,

Plan your orders ahead of time please. Custom projects take a long time for planning, sourcing, executing/manufacturing and verifying the designs and creations. 

We cannot accept expedited orders. (*** Maybe yes if you are our in laws. :p ***)

Orders are placed in queue per the order they come in. 
  • Custom transformer duration is ~1 month, depending on complexity, quantity and time of order. Some may be faster, some may be longer.
  • Transformer repair duration is ~1 month, depending on complexity, quantity and time of order. Some may be faster, some may be longer.
  • Custom finished project duration is ~2 months, depending on complexity, quantity and time of order. Some may be faster, some may be longer.
Please try not chase us for delivery. Please try to understand that we are trying to keep the quality high by not rushing orders, and by not over-expanding the human resources and compromise quality. 

If you are in a rush, please order and pay early so that we can place your project(s) in the order queue early. 

Last minute rush orders will not entertained. (*** Maybe yes if you can consider paying 10x of normal price. :p ***)

Thank you for your cooperation.

J&K Audio Design
10/1/2019

Thursday, November 1, 2018

Alternative payment option

Dear all,

We've found a way to save customers expensive PP transaction fees of 4.5%-5%. 

Contact us and we shall inform you how to do so during purchase!

2/11/2018
J&K Audio Design

Tuesday, May 9, 2017

Professional Shipping Crate

We have heard many horror stories, seen too many videos on Youtube, or even have first hand experience on shipping caused damages to equipment. We have experienced it ourselves too, and have been improving our product packing materials and methodology, to ensure the gears are properly packed and protected before shipment. 

We use professional DJ equipment crate to ship international orders with delicate content, such as amplifiers, isolation transformers, and very high end transformers such as our Level 3, OCS (Silver), OCC (Copper) based transformers. We have been doing this for some time and it has proven to be the safest method for now.

Such professional DJ equipment crate are made to order, and fits the equipment to ensure safe passage from origin to destinations. The body are made with strong ABS plastic, reinforced with aluminum and steel struts, frames and corner padding. Such crates can withstand >100kg of weight on then without breaking a sweat. We even tried standing on it and the structure still holds!


Shrink-wrapped before being packed
All equipment will be shrink-wrapped before being placed in the crate. Since all the professional DJ equipment crate are made to order, the size and price will be according to the size and weight of the equipment. Even the padding inside can be increased or increased accordingly, determined by the content to be shipped. 

Strong Professional DJ Equipment Crate
There are handles on the side to facilitate easy handling for owners. Corners are protected with alu/steel ball-shape pads.

Internal is line with strong foam and padding
Professional grade foam, and optional hard foam can be used as multi-layer protection to keep the shape over the journey.  
 
Crate safety lock
The crate has safety type of locks too, where after the locking flap needs to rotate by 180 degrees before it is able to be released or locked. Holes are available for padlocks usage for security reasons too. 

Customers can now request for such shipping option. 

J&K Audio Design
5/10/2017




Thursday, December 10, 2015

Lead Time

First of all, we'd like to express our apologies for the long lead time of our custom transformers. Due to the overwhelming responses for customized solutions, the orders are more than what we can manage right now. 

Lead time is currently 4 weeks on average. If you planned to work on your project on a certain date, please order your transformers 2 months prior to that to avoid disappointment. 

We have been thinking for quite some time on how to resolve this problem. For producing a product, there is always 3 factors that come into our mind - quality, speed, and price. All three factors work against each other unfortunately.
  • If you want it fast with high quality, it will be expensive.
  • If you want high quality and low price, it will take long.
  • If you want it fast with low price, quality will suffer. 
  • If you want all 3, we're sorry that it does not exist. 


We have chosen the path to have high quality with decent price, and therefore it will take longer time to be produced. If you are unsatisfied with this methodology, please think twice before ordering, and please buy from someone else if you cannot wait. We are very sorry we cannot help you here. Another way of working around it is to please buy our on-the-shelf products like the ALIS and AL0S products. Those can be delivered faster than the customized orders. 

Thanks again for your business and support for all these years, even years before we've started this blog.

J&K Audio Design
12/10/2015 

Saturday, August 30, 2014

Price List

J&K price list for your reference - not all our products are listed. If you do not find what you want, just shoot us an email.

*** Note: This is is outdated. Please email for latest quotation. *** 








J&K Audio Design
30 Aug 2014

Disclaimers:
We may make changes to specifications and product descriptions at any time, without notice. The information here is subject to change without notice. Do not finalize a design with this information. The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Contact us to obtain the latest specifications and before placing your product order.

*Other names and brands may be claimed as the property of others.
Copyright © 2014-15, Intel Corporation. All rights reserved.


Product Lists  

Level 0

Level 3: depends on type, size and complexity. Email us for details.
Iso-trans: link 1, link 2
* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.  
* Our product lines are always improving and increasing. If you do not see what you want, contact us!  
* Please email for volume discounts, distributor and OEM pricing.

Monday, August 18, 2014

How To Order

How to order our products?

* Just email us your wish list!
* Use the contact form at every bottom of page!




J&K Audio Design
18/8/2014

Product Lists  

Level 0

Level 3: depends on type, size and complexity. Email us for details.
Iso-trans: link 1, link 2
* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.  
* Our product lines are always improving and increasing. If you do not see what you want, contact us!  
* Please email for volume discounts, distributor and OEM pricing.

Friday, March 14, 2014

Output Transformer Performance

Good day to all! (1/1/2015 - Obsolete - we have added so much more options now, email to ask for more options!)

We've received a question from our followers: "You have so many types of transformers. Which one sounds the best? Can you let me know the ranking to make my purchase decision easier?" We hear you. So, this is what we rank our transformers from top down:


  • Sound ratings
    1. Precision Series 
    2. Vintage Series / Value Line
    3. Miniwatt Series
Note: Value Line is limited edition and will be removed once British C core runs out.

  • Core ratings
    1. New Japanese amorphous C Core / Recycled British amorphous C Core
    2. Laser etched silicon iron C Core
    3. Normal silicon iron C Core
    4. Z6 - Z9 - Z10 - Z11 EI Core
  • Wires
    1. Silver wires
    2. Silver plated wires (depending on applications)
    3. Copper wires
Notes:
  • Some combinations will not be available - ex: Precision Series on British amorphous C Core. Pleas email for more information.
  • Precision Series - created by 30+ years true master winder, combining theory, practical, and high tech test & measurement equipment. 
  • Vintage Series - created by 30+ years master winder, following the old school method of transformer making.
  •  Miniwatt, Value Line - created for the best balance of performance and price.
Pick your poison!

J&K Audio Design
14 MAR 2013

Product Lists  

Level 0

Level 3: depends on type, size and complexity. Email us for details.
Iso-trans: link 1, link 2
* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.  
* Our product lines are always improving and increasing. If you do not see what you want, contact us!  
* Please email for volume discounts, distributor and OEM pricing.

Thursday, December 19, 2013

How To Order Transformer



How To Order Transformer

To order transformer, please be absolutely very clear on what you want. If you have already a sample in mind, it’s even better, just send us the details. There are so many variations to the application of transformers. So, if you want to order transformer, we need to understand what you will use it for so that there is no miscommunication. 

Once it is made, there is not turning back unless to spend more resource and money to discard the original design and remake another one. Maybe the core can be salvaged. It will not be definite.
Here is how the processes go:

  • Provide the detail specifications of your transformer.
  • Obtain price quotation from us.
  • If OK, make payment.
  • Once payment is confirmed, work shall start immediately.
  • It usually takes 1 to 2 weeks to complete a standard order, longer if it is repair work or higher volume orders.
  • It comes with 1 year warranty. Once sold considered final. You can change the design after it is being built, additional charges apply.


We usually do not keep ready-made stocks unless listed in our website as surplus or extras since all our transformers are made to order. Please do not question our quality. We use genuine Japanese Z11 core. The cost of this better efficiency core alone is already many times the other inferior cores others use, not to mention the meticulously wound windings. Winding 1 transformer takes almost 1 day. Therefore it is worth every penny you invested on it.

If you have used, damaged, burnt and various transformers for restoration, please email us the picture and details before sending the transformers over for price estimation and pre-evaluation to ensure your satisfaction. 

We are using imported Japanese Z11 transformer cores, hand wound to perfection. The quality and safety are many times better than those H50 or H18 core wound by machines. There is just no fight between ours versus those alternatives out there. 

If you need Western Electric cores for your projects, we can do it too. Since we do not keep stock of the W.E. cores, you will have to supply us and we will wind it to your specifications, well, if the cores are up to the job and the laminations are still in good conditions. We cannot salvage those that are heavily damaged or oxidized. We’re not superman. 

We wind the transformers layer by layer, insulated by insulation film / paper per layer. For output taps, they will be insulated again for double safeties. These processes take time and are costly to make. We seldom see that nowadays on the generic transformers sold outside. Without such insulation, the lifespan of the transformer will be shorter. Coupled with non-soaked with varnish transformers, it will look new but the quality will not be there. 

If you are unsatisfied with your current transformers even if they’re not defective, be it too hot or waste too much power, get them all overhauled and replaced with high quality Z11 transformers. You will enjoy a cooler, safer and better system!

Our transformers are made with some reserves too just in case some overloading happens; it still will not break easily. Although so, do not order the transformers with such in mind. It is meant for your convenience, not as a design consideration. We cannot guarantee if you deliberately do so. It is your own wrong doings. 

Using low quality transformer is just like burning money! Do it right the 1st time, and do not save on what you should spend on. We do not compete in price wars. You are absolutely welcome to buy from others if they’re cheaper than ours. What we offer is technical competency, professionalism and excellent products. We truly believe that what you pay is what you get! There is no free lunch.
Properly aligned winding, every layer is insulated.

Quality is our motto! The one all can trust! 


Q: Do you accept PayPal?
Yes we do. Please add 4% to the total for PayPal charges.

Q: When I register with your site, how is my data used?
Your data is private. We never pass your details on to third parties. We do not hold credit card information on our server. Only your email, delivery address and order details are retained to enable faster check out on future orders and will never be shared with anyone.
1
Q: What is the expected delivery time of my order?
We aim to deliver your order within 4-8 weeks from payment. Due to COVID19 pandemic, additional lead time may incur. 
1
Q: Is there any import tax or duty?
Some locations charge a Tax or Import Duty on arrival at customs which has to be paid when the product is delivered to your home. This is unavoidable and the amount charged may vary in your destination country.
1
Q: What if my order is damaged or lost in transit?
Customers can choose to insure the products shipped.
1
Q: I can see the products I want to buy, but it says out of stock.
We produce a large range of products and at certain times we run out of stock of some models. Please contact us regarding these products and we can advise on league times for the next production run.
1
Q: Is there a warranty on your kits?
We do provide a 12 month warranty on our products (excluding valves).
1
Q: Is customized order refundable?
Due to the nature of customization for individual requirements and will not suit the public in general, those orders are NOT refundable.

WARRANTY NOTICE
We warrant J&K Audio Design products to be free from defects in workmanship or material, and will, replace or repair within one year from date of shipment from our factory any products that may be found defective upon inspection at our factory. This warranty does not obligate us where products have been subjected to careless handling, improper application or faulty installation, and we expressly disclaim any obligation, guarantee or liability whatsoever except as above stated.

Both limited warranties are subject to the following limitations:
1. Defects that are, in the sole judgement of J&K Audio Design, the result of accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, unauthorized repair, modification, or acts of God will not be covered by this warranty.
2. In the absence of proof of date of purchase, the date of manufacture (as determined from lot numbers of internal parts and the records of J&K Audio Design) shall be used in its place.
3. There are no express warranties except as listed above.
4. J&K Audio Design SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF THE BREACH OF THIS WARRANTY. Duration of implied warranties, if any, is limited to 12 months.
If a problem develops with this product during the warranty period, call or write us before attempting any repair. We can help you identify specific problems, and possibly solve the problem, before the unit is returned to us for repair or replacement. In any case, DO NOT RETURN THE UNIT WITHOUT AUTHORIZATION and instructions from us. J&K Audio Design cannot be responsible for damage due to shipping or improper packaging.


LIMITATIONS OF LIABILITY
The information provided on this website has been checked and is believed to be accurate; however, no responsibility is assumed by J&K Audio Design for its use nor for any infringements of patents which may result from its use. No license is granted by implication or otherwise under any patent or patent right of J&K Audio Design.
J&K Audio Design PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS, OR IN ANY APPLICATION WHERE THEIR FAILURE COULD CAUSE INJURY OR DEATH.
J&K Audio Design reserves the right to make changes without further notice to any of its products. J&K Audio Design makes no warranty, representation or guarantee regarding the suitability of any of its products for any particular purpose, nor does J&K Audio Design assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages.


J&K Audio Design

Wednesday, December 18, 2013

Customize Transformers


Customize Transformers

If you are planning to customize transformers for your project, you can contact us. We offer HIGH QUALITY reasonably priced high quality Z11 EI core (Japanese made) transformers custom winding services. We’ve just partnered with 2 master guru level transformer winder with over 30 – 40 years of winding experience to offer you this service. 
  • Power transformer (any devices, not just audio equipment)
  •  Isolation transformer
  • Step-up or step-down transformer
  •  Output transformer (power, pre, headphone output)
  • Input transformer
  • Inter-stage transformer
  • Inductor / choke (grid choke, power supply choke, plate load choke, crossover choke (include multi-tap choke for tone adjustment – ex: Tannoy crossover, need a unit to reverse engineer)

Notes:
  • Various outlooks / mounting style available, please send us pictures on how you want it to look like to avoid miscommunications.
  • Black powder coating available for additional small surcharge.
We can customize transformers based on the cores you provide too, like C-core, double-C-core, R-core, amorphous core, nickel core and etc, except toroid core. If you want to repair your machines with toroid core, we will replace equivalent EI core for you.

We’ve received many cases where DIY audiophiles supply “Western Electric” iron cores salvaged from defective / salvaged equipment to be wound for their new projects. The tonality of these Western Electric cores is just way much better (or different) compared to the modern cores.  

We offer all sorts’ transformer repair services too on top of customize transformers. We will try out best (sometimes the damages are so severe that the burnt core is no longer usable) to rewind the transformer according to the original specifications and follow the original winding method to preserve the sound characteristics of the original transformer. 

A lot of vendors say that they’re experienced but when they meet with more complicated transformer (many or special windings), the repaired transformer will not be able to fit back to the chassis. Repairing and restoring transformer is a time & energy wasting job. Inexperienced people will not be able to properly restore it and the equipment will not be able to function properly or to be resold. Stability, reliability, power consumption and safety are not taken into consideration yet!
Reverse engineering service is offered to for obsolete transformers to reproduce or customize transformers for service and repair use. 

Important tip: to reverse engineer for repairing transformer, lots of patience and attention to details are required. One needs to record down how the transformer is winded, and what are the turns ratio and minute details to restore it to the original design. If it is not done so, the tonality will not be the same again. If one is careless during the reverse engineering process, the old windings will just break apart and the details cannot be retrieved anymore. Therefore, repairing such transformers takes a long time, much longer than the others that simply substitute with sub-par quality design. Every steps count! This is where all the REAL skills are. 

Transformer upgrade is available if your current equipment transformer is not up to the job or having problems – too hot, humming, rattling, excessive sag, intermittent failure, sparks or unsafe termination and etc. 
  • Custom size transformers available for space constrained designs (good for modders or replacing damaged transformers in an existing chassis!)
Power conversion service is also available – change from 110-120Vac input to 220-240Vac, and vice versa, or any voltages you desire, for any types of cores. 

Email us for details and price quotation.

Our quality promises

A lot of suppliers can wind transformers. These transformers can all be used, but to what extent, is really questionable. The internal construction and the winding methodology is where it determines the safety, quality, reliability and end results. This is where the value of the high quality transformer lies.
  • Wires are perfectly aligned.
  • Inter-windings are perfectly aligned.
  • Inter-windings are insulated.
  • Z11 core material, made in Japan.
  • Insulation material, imported from Japan, meet international standards.
  • Correct wires types are used – right insulation ratings, gauge and specifications.
  • Cores are perfectly aligned to increase efficiency and reduce wastage / heat.
  • Correct or oversized core are used, no under-cut.
  • High quality bobbins – nylon or equivalent grade.
  • Tidy, clearly marked, safe and properly insulated and terminated taps.
  • Conductive tape wrap around windings available for EI core transformers.
  • Electrostatic shield available for power transformers.
  •  Every step of the manufacturing processes is dealt with great care.
  •  Guarantee no transformer mechanical hum or rattling.
  • All being wound be 30-40 years’ experience professional master level winder.
You can measure the bandwidth using test equipment (oscilloscope, spectrum analyzer, LCR analyzer, audio analyzer and etc) to see how good our transformers are.

Indicative price (as reference, we will provide customization according to user request/specifications).


    •  Precision Series Output Transformer  (PREMIUM)
      • Provide your specifications and contact us for pricing.
      • Frequency response: 
        • Single Ended:
          • 20Hz – 30kHz +/- 0.5dB
          • ~5Hz - 100kHz +/- 1.5dB (usually is)
        • Push Pull: 
          • 20Hz - 30kHz +/- 0.4dB
          • 10Hz t0 50kHz +/- 1.2dB
      • High impedance design >10k, specifications will vary, contact us to customize.
      • Depending on applications, transformers will be treated with wax or varnish soaked in vacuum chamber to draw out all the air to ensure total penetration, and baked to perfection.
      •  If you need better specifications or customize to your listening taste, please let us know. We can do so for you with extra charge.


    • Vintage Series Output Transformer (standard)
      • Frequency response: 20Hz – 20kHz +/- 3dB or better
      • All transformers are soaked in varnish overnight and baked to dry. Some will have wax instead of varnish, depending on applications.
       
    • Power Transformer
      • ~U$0.50 to U$1.00 per VA, depending on complexity and finishing.
      • Z11 core.

    • Choke / Inductor
      • Various values and sizes are available.
      • Z11 core.
    Our internal quality assurance is actually stricter than what we published here for our customers. We will ensure the tolerance is kept very tight. 

    Safety & quality are our utmost priority. Pay for the quality, so that it can last longer, consume less energy and sound better! You save in the long run – just imagine what the ever increasing energy bills will cost you and how much you will save! It pays for itself in the long run! Your transformer will be FOC – free of charge eventually from the savings!

    Our varnishing processes are not just dip the transformer in varnish and take it out immediately for drying. It is fully immersed overnight, left for air dry and then followed by baking to fully dry the unit. For the precision series, it is vacuumed to withdraw out all the trapped air totally. 

    As all our transformers are meticulously made for quality excellence, it requires a lead time to get it completed. So, please order your transformers early. This is a true old school transformer making. Z11 core alone does not guarantee that it is of excellent quality. 

    The internal winding quality is very important. The winding design will affect the transformer lifespan and power consumption. This is not to be omitted. Depending on complexity, sometimes It takes almost 1 day to complete a custom wound transformer. Our transformers are having 1 winding layer sandwiched with 1 layer of insulation film / paper! That’s where all the cost of workmanship (and quality) comes from!  

    Not to forget, as our guru winders are considered not young anymore (what can we expect after 30-40 years of work experience), they will retire soon and being replaced by younger apprentice. Quality will still be excellent but it won’t be as perfect as what the experienced master winder can make. So, order them while we still can offer them. Once it’s gone, it’s gone forever. 

    Sometimes people cut corners by looking for cheaper transformers. Do you believe this philosophy – what you pay is what you get? Nobody is going to make a loss for selling you their products. If it seems too good to be true, then don’t buy it. For sure something must be compensated and for transformers, it is what they use that scares you as it is not visually apparent to most users. Many factors can be compromised, for example:
    • Iron core type / grade
    • Insulation material quality / grade
    • Winding quality
    • Wire quality / specifications
    • Bobbin quality
    • Proper insulation and arrangement for output taps
    Cheap versus good makes a huge difference! What’s the purpose to spend thousands of dollars one expensive power cord, just to be matched with a low quality transformer with wires that is 10’s of feet long or even longer.  

    Important tip 1: overheated core (from wrong core material, undersized core, wrong wire size or etc) will make the insulation material degrade faster and therefore shorten the lifespan of the transformer! Have you seen a burnt transformer, or a transformer winding burst into flame? I’m sure you do not wish to witness that. 

    Important tip 2: hire only reputable transformer guru to repair your transformers for OEM equipment to prevent the transformer being swapped with inferior core (There are such conmen out there, beware! Really cry no tears!) or the windings are not following the original design. The sound will end up to be totally mismatched between the original and the repaired transformer. Don’t save on quality. You are saving as a return! 

    Transformer is the beeping heart of audio equipment. Selecting the right transformer is critical towards good sound. Don’t compromise the safety and quality on buying from unknown sources! Your family and own safety are the most important thing of all! 

    We treat transformer as a piece of art and use our heart to design and consider all the parameters to make it an excellent transformer, not just quality, but the look as well! This will show our high product value and differentiation compared to other vendors. 

    All our transformers are custom made for our customers. We can follow customer machine sizes, opening dimensions, mounting holes; voltage taps requirements, current requirements and various other criteria to design the various types of transformers. Customers can even select the types of wires to be used for input & output taps for best effect or fine tuning. So, contact us for details.
    Don’t throw away your old gears or damaged transformers. Repair them. Save our mother earth by not wasting and recycling! We take pride in our transformers to meet your voltage and current specifications. Order with confidence! 

    Please provide the following data when ordering (where applicable) for better estimation of price and size.
    • Usage model / type
    • Power ratings or output power
    • Primary / secondary impedance
    • To be used for what and how many tubes
    • Intended steady state current / plate load current
    • Class A,A, AB, Single Ended, or Push-Pull
    • Desired size
    • Outlook / style
    • Compromises or special requests
    ·        P/S: we do not customize or repair toroid transformers

    Distributors / resellers are welcomed.

    Disclaimers:
    • Price is right at the time of publication and may fluctuate according to the ever increase of iron core price, copper wire price and other material prices. Lock in early to prevent disappointment.
    • Once sold, no returns accepted other than warranty returns. Please contact us prior to sending the items back for repair / servicing to discuss the details.
    • We offer volume discounts. Please email for details. Due to the handmade and time consuming nature of our products, lead time may be longer for larger volumes.
    Thank you! You deserve the best from us! Order early to avoid disappointment!

    J&K Audio Design

    Search This Blog

    Product Lists

    Product Lists

    Level 0: link 1

    Level 1: link 1, link 2, link 3, link 4

    Level 2: link 1, link 2, link 3, link 4, link 5, link 6, link 7, Link 8, link 9

    Level 3: depends on type, size and complexity. Email us for details.

    Iso-trans: link 1, link 2

    Power-trans: link 1

    * Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.

    * Our product lines are always improving and increasing. If you do not see what you want, contact us!

    * Please email for volume discounts, distributor and OEM pricing.