Check back regularly or subscribe for updates. Email us at jandkaudiodesign@gmail.com, or fill in the form on the left.
Showing posts with label Repair & Upgrade. Show all posts
Showing posts with label Repair & Upgrade. Show all posts

Monday, February 17, 2020

Vacuum Tube Repair

Good health to all J&K readers, supporters, and most importantly customers! 

Just a little update on the COVID-19 outbreak - latest news is that some of our suppliers will resume work on 24th FEB 2020 - hope that situation improves that much to enable them to resume production. 

Now back to our agenda here - vacuum tube repairs, or vacuum tube revivals!

I believe, transformers repair is nothing new to our followers. We've repaired hundreds, if not thousands of them over the past many years. 

Another critical part of the solution chain would be on vacuum tube repair and revival, especially on those exotic NOS tubes that cost quite a considerable amount of money. We now offer vacuum tube repair or revival service to our customers through our long time partner (a tube maestro). 

Do note that not all vacuum tubes can be repaired or revived. Some are dead for good. For some that are still having some life in it, or failed prematurely, or even fail as DOA, maybe they could be repaired. In some cases, some even be buying those expensive exotic NOS tubes that are dead at a dirt cheap price, and sending them to us for repair! If by any chance those dead exotic NOS tubes can be repaired, they could save thousands of dollars comparing to buying good exotic NOS tubes. Those that are worth repairing are those Western Electric signal or power tubes, Genelax / Gold Lion signal or power tubes, or even any old big power tubes that worth fortunes. 

Since repairing or revival could a 50-50 or worse kind of odds, one may need to weight the pros and cons before sending for repair. Vacuum tube repairs or vacuum tube revival starts at U$100 per piece, and could be more depending on the type of tubes and illnesses. 

Loose base, no connection at tube pin due to broken wire or cracked solder, or broken pin can be easily repaired by base replacement or re-connection internally at the base. Broken filament, could possibly be repaired, on case by case basis. 

Here are some things to be considered before sending vacuum tubes for repairs or revivals: 

1. Are they worth the trouble or worth the price? Repair price could be more than buying them new or  or buying NOS. 
2. Mechanically broken vacuum tubes are not repairable - such as broken glass or vacuum loss (inside appears all white). 
3. Severely broken tube internally (massive internal structure failure, broken plates for example).

For other cases, please send us some pictures and descriptions and we shall see what we can do. 

Examples for some cases on vacuum tubes that could possibly be repaired:

1. Crackling noise
2. Keep blowing fuses 
3. Filament shorted 
4. Internal pins shorted 
5. Open connections 
6. Intermittent operation
7. Missing base / base repair / base replacements
8. Oxidized tube pins / internal wires
9. Weak tubes 
10. And etc... can't list all since there could be other illnesses 

Contact us, if unsure.

Now, go dig your storeroom and see if there are any vacuum tubes you'd like to be repaired. Better still, go ask all your tube audiophile friends for used tubes, broken tubes that they do no longer use, and see if they are worth repairing or reviving! They could save you a fortune, or make you some good money after being repaired! 

Tubes that are worth repair, for example, could be 212, 4212, 211, 4211, 4300B, 300B, 2A3 single plate, 2A3 double plate, 801A, PX4, AD1, 53KU, 52KU, U52, EL156, KT88, KT66, Telefunken, Western Electric, Genelax, and various other expensive exotic tubes. 

Vacuum tube dealers, sellers, shops owners - if you have tubes that you think are worth repairing, please contact us and we may be able to repair them for you for re-selling later. The same 3 rules above apply. 

Start digging! You may encounter a few gold mines! Don't let the exotic tubes go to waste - recycle them! 

J&K Audio Design
18/2/2020 


Tuesday, August 6, 2019

Vintage transformers repair

Greetings folks. Life has been busy, and therefore it translates to the lesser and lesser post we have.

Recently we've heard some horrendous news where there are repairers that swaps valuable vintage transformers for el-cheapo newly built transformers.

Just beware!

We'd never do so. Everything that is salvageable, will be reused, especially the cores and the bobbin.

Just look at the multiple posts of vintage transformers that had been repaired by us, and are being used now all over the world.

They are rebuilt with the utmost care to preserve the original design, original sound and tone.

Use our service with confidence.

Check out the multiple postings in our FB page!

https://www.facebook.com/groups/jnkaudiodesign/

Cheers! Signing out!

J&K Audio Design
6/8/2019

Friday, December 21, 2018

Transformers repair

Repair transformers? Call us trans repair king! I think hundreds, if not thousands of transformers have gone through our hands over the years. 

We are very happy to hear that our customer's McIntosh amp are repaired. Well, this is just one of the message we get, there are many more that we're just too busy to post. 



We can learn the transformer winding method from others, and we help to restore the damage equipment - saving mother Earth from being overwhelmed with more electronics junk! 

Nobody (or very less, LOL) repairs transformers like us. We'll unwind EVERY unit received and record down all the data about the transformers so that we can rewind it back exactly, according to the original materials, if can be found. 

Your transformers will get a new lease of life for another few centuries as long as it is working in the original designed conditions. 

Repaired transformers get a 1 year warranty. Conditions apply, such as, as long as is not abused, or placed in a faulty amplifiers (well, that could be what caused it to burn initially, right?). 

Tips: it is very important to keep the original core of the transformers. Once it's gone, it's gone. That's the most important component in repairing transformers. We recommend to reuse the original core to get back the original sound signature of the transformer. 

Now, get your damaged transformers here! McIntosh, Marantz, Scott, Dynaco, AudioNote, any transformers, as long as they are not burnt to ashes, we can repair it. Satisfaction guaranteed! 

J&K Audio Design
22/12/2018 

Saturday, June 17, 2017

Tube Tester Transformer Repair

Restoring your vintage tube testers? Found out that your tube tester has burnt transformers? No problem at all! Look for J&K Audio Design. We will get your tube tester transformers repaired in no time (well, in some time actually since they're quite difficult to repair due to massive output taps).

We even retained the original outer layer of "skin" to enable builder to easily recognize the taps.


Tube tester transformers

Repaired tube tester transformers

tube tester transformers
We can repair all of them, be it Hickok tube tester, B&K tube tester, Sencore tube tester, WE tube tester, Teletest tube tester, Heathkit tube tester, or any other tube tester you can find. As long as they are having transformers not potted in epoxy, we can repair them.

So, what are you waiting now? Time to get those tube testers, whether it is damaged or not, for your tube amplifier DIY hobby. Maybe you're lucky enough to get one damaged one at dirt cheap price, and just spend a little to restore them to their previous glory.

J&K Audio Design
 

Tuesday, December 27, 2016

HIFI Repair

Is this a trend or what - manufacturers not willing to repair their gears after warranty period is over, even if customers are willing to pay? Please share your experience in our comments section.

We occasionally take in some damaged HIFI equipment to repair, as a good will to get the gears alive again, or helping friends and customers, as a favor. This, however, has led us to discover some unhealthy trend that the after sales and service of certain manufacturers and distributors are as good as none.

Some HIFI equipment requires special parts and PCB to be replaced in order to get them alive again, such as the controller board for smart power management system for a battery backed power supply regulator, label masked off parts, special custom made integrated circuits (IC), and such. These parts are not available outside, except the creator/manufacturer themselves. 

To our dismay, multiple mails and phone calls are often, not successful to get their responses to entertain our requests, or even our customers' queries! What kind of customer service is that?

The most recent one, is to ask for just a replacement power transformer (willing to pay!) since the specifications is not made known to us, and the owner wanted the original part. Nadah... distributor is wiling to entertain for a few mails but at the end, nothing. Manufacturer just kept quiet since day one. Bravo service, really! Oh ya, your design sucks too, cramping all the parts in a small chassis, including a big hot power transformers, with very minimal venting. No wonder it failed, and failed twice - the unit has got the original power transformer replaced once, with a badly done job. I guess the repair guy could not get replacement part and just substituted with anything he can find on hand.

It is not that we are asking for free parts and free service! Our friends and customers are paying a hefty price tag for the HIFI equipment they purchased! It is their right to get replacement parts at least, if sending in for repair is not an option. Nadah... not even a reply of email sometimes, or sometimes a wait of eternity is presented to us, on the requests.

Gosh... even a little entity like us, provides better service than them! Shame on you!

Now you guys have 1 more thing to consider before buying any HIFI equipment - ask around first on the after sales service, the durability of the equipment, and how helpful is the seller/distributor!

Just venting out... thank you for listening, and share your good or bad experiences with us, in the comments section!

J&K Audio Design
12/27/2016

Thursday, September 8, 2016

Peerless Input Transformer Repair

We've repaired a lot of power transformers and OPTs in the past. Chances of repairing input transformers are not has high since the failure rate is less compared to others but we still do get them once in a while, especially those very sought after versions, such as input transformers from Western Electric or Altec Lansing, such as this one that we just received.

The data was quite hard to be found online for this Altec Lansing input transformers. The owner provided the specifications to us after checking with the new owner for Peerless transformers. 

Input impedance: 25K CT
Output: 600 CT / 150 Ohm




This is how it looks like before it was dismantled. It is sealed in some sort of rosin and requires heating before the transformer can be taken out. 



After the extraction, the core lamination (obsolete now) are then cleaned up before it can be reused. The winding and bobbin are discarded as they no longer can be used. Due to the non-standard size of the core lamination, a customer bobbin has to be made to get a perfect fit. Standard size bobbin will not fit properly and there shall be unwanted design deviation that will not get it back to the original condition and performance. 

The original bobbin / winding are slowly and carefully unwinded to record down the original turns and taps location for rewinding later. Luckily the damage was not that bad that prevents us from doing so. If not, another unit might be needed to complete the big picture, or smart guesstimate based on physical unit + theoretical data will be required if no references are available.









Another challenge was presented to us when it is time to rewind it - the wires used are of diameter of 0.05 with 3000 rounds of primary turns with a center-tap!!! It is quite difficult to rewind and had to be manually done slowly. If it is broken, what's done will have to be thrown away and new one redone. 







After a 3 day affair, finally it is done! It will be shipped back for testing before another 3 remaining units are repaired with the same methodology & processes. 

Refurbishing or repairing input transformers will be worth doing so if it is those vintage exotic ones such as those Western Electric types where a pair could be U$1K - U$2K nowadays, or for those looking to restore expensive vintage equipment to original condition that can fetch pretty good price in the market.

J&K
9/9/2016

Wednesday, April 13, 2016

Audiophile Components

How important is the component used in any of your audio equipment? Why are we, audiophiles, so obsessed with audiophile components? Does it really matter that much? 

Well, it does, and very much.

Check out this video below where a generic cement resistors, Duelund carbon/silver resistor and autotransformer are compared in a speaker crossover. Below is a must watch video from Kenrick sound. It is kind of old (dated) but gold!


You have no idea how important they are, till you experienced it yourself. We have used Duelund, Mundorf, WBT, AN resistors/capacitors, and many other audiophile components, and they seldom disappoint us.

Same with NOS tubes. We can't say enough about them, how good they are and how it improved the sound! 

Time to take out your soldering irons and get them hot for some soldering work! 


Enjoy. 

13/04/2016
J&K Audio Design 

Product Lists  

Level 0

Level 3: depends on type, size and complexity. Email us for details.
Iso-trans: link 1, link 2
* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.  
* Our product lines are always improving and increasing. If you do not see what you want, contact us!  
* Please email for volume discounts, distributor and OEM pricing.

Thursday, January 28, 2016

Marantz 8B Output Transformers

One of the issues of cloning legendary designs like Dynaco ST70, Marantz 7/8/8B and so forth, are the difficulties in getting the original output transformers to go with the design. Due to age, the originals output transformers are hard to come by, and most of them time, in very bad condition or damaged. 

On top of that, buying replacement output transformers from other makers, that do not follow the original design, the tone, quality and taste of the original design is lost, or deviated further away. Worse is that some of the original designs / schematics do not specify the primary/secondary winding in detail where it is impossible to remake.

Well, we have good news for you. We've repaired many famous and legendary output transformers in the past. We've reverse engineered it for our customers, kept the design data so that we could reproduce the same exact copy if future customers that want to restore or rebuild their classic machines, using the original cores, or with modern cores.

A few of them are Marantz 8B output transformers with the feedback secondaries, or WE 543A input transformers and etc. 

Let us know what you need and we shall check if we have it for you.

Do note that we do not support piracy. We do not clone modern designs for profit. These are just for restoration/repair purposes only, or for extinct and out of print designs only.

1/29/2016
J&K Audio Design

Product Lists  

Level 0

Level 3: depends on type, size and complexity. Email us for details.
Iso-trans: link 1, link 2
* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.  
* Our product lines are always improving and increasing. If you do not see what you want, contact us!  
* Please email for volume discounts, distributor and OEM pricing.

 

Saturday, August 29, 2015

Transformer Repair


Transformer burnt? 

Transformer malfunctioned? 

Transformer does not work for no reasons, apparent reasons? 

Transformer has issues - fever, flu, diarrhea, and any diseases at all?

Transformer has gone missing on your newly acquired amplifier from eBay, Audiogon, online seller, or anyone? 

Purchase damaged high value, vintage transformers (such as WE transformers for example) cheaply and restore it to original conditions for resale, or personal usage, we can help with that too!

We can help!

Send us the pictures, dimensions and weight and we shall provide you a quotation to make / repair it to be as close as the original conditions. We can reverse engineer it and clone it to the original conditions. We have repaired so many transformers that if you need any vintage transformers to clone a machine, we might be able to help too. 

Let us know!

J&K Audio Design
8/29/2015

Product Lists  

Level 0

Level 3: depends on type, size and complexity. Email us for details.
Iso-trans: link 1, link 2
* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.  
* Our product lines are always improving and increasing. If you do not see what you want, contact us!  
* Please email for volume discounts, distributor and OEM pricing.

Saturday, June 6, 2015

Wavac PRT1 Tube Roll

We're helping a friend with a set of very high end audio gears to fine tune is system for better performance. His system consist of full set of Wavac amplification gears and Acapella Campanile speakers (huge)! 

The sound was rather noisy and the imaging was messy and rather veiled. Bass was bloated and could not dive as long as it could. A lot of steps had been taken and it brought significant improvements. Still, there were something wrong with the setup. It did not sound that "high end" considering the price paid for the system (>U$200K we think).

Since the Wavac PRT1 never had its' tubes changed, we decided to give it a try. The stock unit were unknown until we opened up the unit. It was JJ. We ordered a batch of Siemes E82CC, long plate, triple mica NOS, matched quads and gave it a go. 

The changes in sound is just substantial - deeper and more natural bass, veil is removed, soundstage deepens, tonnes of details revealed, vocals are warmer, clarity improved significantly. Now it sounds like a U$200K system.

After this change, the improvement was so significant that owner asked if we can upgrade the tubes and components inside Wavac PRT1 as well as his Wavac 300B and 805 power amplifiers! Well, that's for another time. We still have his EL84 push-pull power amplifier to complete and other customers' projects to finish before we can come back to his amplifiers again.

Here are some pictures for your enjoyment: 



Chassis milled from a solid block of aluminum

Some red wine to add flavors to the sound

Internal of Wavac PRT1

Tango Output Transformers (we think) is used at output stage




A bunch of JJ ECC82 are retired.

JJ ECC82 tube

Tube covers

Tubes rolling.

Siemens E82CC inserted

Observing the components used in Wavac PRT1

Capacitors used in Wavac PRT1 - certainly we have lots of room for improvements!

Input transformers (we guess, cannot see inside) for Wavac PRT1 (botom left)



On top of the tube roll, we've brought a secret weapon along too - a pair of J&K super-interconnects (RM1.2K a pair).




  • improved signal-to-noise ratio and interference rejection
  • high frequency shielding
  • shielding at bents (soft shield)
  • optimized cable capacitance and inductance, matched pair
  • meant for high speed transmission
  • extreme flexible body
  • multi-core cabling technology


This cable performed so well that 2nd pair were ordered to connect from Wavac PRT1 to Wavac EC300B and Wavac MD-805MK-II power amplifier to biamp his Acapella Campanile speakers, in replacement of his super expensive interconnects that cost many times over this J&K interconnect.

J&K Audio Design
6/7/2015

Product Lists  

Level 0

Level 3: depends on type, size and complexity. Email us for details.
Iso-trans: link 1, link 2
* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.  
* Our product lines are always improving and increasing. If you do not see what you want, contact us!  
* Please email for volume discounts, distributor and OEM pricing.






Saturday, January 17, 2015

Amplifier Hum

Let us share a story related to amplifier hum with you guys. We think that it is worth reading as it may be applicable to some of the new DIY guys.

Recently, there's a guy that ordered a full set of Level 3 transformers from us. That includes - 1 Level 3 power transformer with Super Hi-B double C core, 2 Nanocrystalline double C choke, and a pair of Nanocrystalline output transformer.

According to him, his previous similar project ended up being too noisy and has pretty serious humming although he is using quite decent transformers from some company that we should not mention here. He is hoping that by getting high quality transformers from us, it will help to resolve all his problems.

We have heard this comment for many times and we always replied the same message to them, that we will write below. Since it affects a lot of the newbies, we decided to publish an article here so that everyone is clear on this topic.

A good set of transformers will no doubt bring you better signal to noise ratio, low hum, darker background, wider bandwidth, better THD and all those goodies, but, if your design look like these:


Amplifier layout that looks like Ampang Yong Tau Fu

Design that looks like Char Koay Teow (fried noodle)

Wiring that looks like Singapore Char Bee Hoon

A good set of transformers will only give you the edge and advantage to be at a higher ground than other low quality transformers, but if the design, ground, wiring, layout and all those important aspects of amplifier building are not followed, the end results are not going to delight you very much.

One thing that new DIY guys can do is to look at how others do the layout design on the WWW, and LEARN from them. There are thousands of nicely laid out design in the market nowadays. Their level of workmanship is simply stunning. We admit, we cannot come even close to some of the masters out there too but we'd always exchange photos internally when we come across those excellent designs out there and keep polishing our layout skills.

Layout is an art!

On schematic, or circuit design wise, beware of what you want to copy or clone. We've repaired many branded amplifiers and clones. There are a lot of "flawed" or purposely modified famous designs out there to mislead someone that by cloning these famous design, they get close to the sound of the OEM equipment. We found that a lot of those schematics floating online are NOT the actual design someone purchases on the shelf. They are mislabeled, values are changed, designs are changed purposely for you know what reasons. So, unless you know what you are copying, go ask someone that knows before you do something. If you are lucky, it works perfectly or substandard-ly. If not, kaboom!

Good luck in your DIY journey! Questions and discussions welcomed even if you are not purchasing from us. Audio is not just our business but our hobby too. Just use the contact us box in our blog to reach us.

P/S: No pun intended on using food pictures as references. It is just an analogy. These are no doubt great hawker food in South East Asia.

J&K Audio Design
1/18/2015

Product Lists  

Level 0

Level 3: depends on type, size and complexity. Email us for details.
Iso-trans: link 1, link 2
* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.  
* Our product lines are always improving and increasing. If you do not see what you want, contact us!  
* Please email for volume discounts, distributor and OEM pricing.

Wednesday, January 7, 2015

Audio Note Conquest Upgrade

An Audio Note Conquest 300B PSE power amplifier came in for repair and upgrade. Smoke rose from this unit when it was in operation. Upon inspection, the cathode bypass capacitor was blown, together with the 300B tube where the filament was broken and the spring came loose. It is either the defective 300B tube damaged the amplifier or vice versa.

Since this unit has been used for quite some time, the owner agreed to recap all the electrolytic capacitors. We checked all the capacitors and found that some had already leaked and some are busted, including some resistors that showed sign of overheating.

Some mounting that we do not like was also modified - electrolytic capacitors being placed directly beside a vacuum tube. Such capacitors will be operating at high temperature and will have shortened lifespan.

The stock ceramic tube sockets were of low quality types and were replaced with Teflon or high grade ceramic with gold plated copper pins. The new sockets provides a much better contact, mechanically stable, and less resonant compared to the stock sockets. There are several other changes and modifications that we do not mention here but is beneficial to the sound or build of the Audio Note Conquest amplifier.

The owner wanted to upgrade the EI output transformer to J&K Level 3 Nanocrystalline Output Transformer too but unfortunately the cavity was too small to fit the Level 3 OPT. The owner will be saving that for a future new tube amplifier.


Audio Note Conquest

Teflon tube sockets with gold plated copper pins

Tube rectification board before modification

Top view after completing the modifications - note all the new high quality tube sockets.

All the Rubycon capacitors are changed to Nichicon

The low quality rectifier tube socket

Modifications made to provide 5X4G compatibility. Capacitors are upgraded too.

Comparison of high quality versus low quality tube sockets.

Worn capacitors and tube sockets

Some doctor scribblings on what to change.

Side view of the high quality Teflon 300B tube sockets

Teflon 300B tube sockets

Nichicon Capacitors for B+
It was found that some of the components are not matching between the 2 mono-blocks. It might have been some poor repair jobs done previously. The soldering job was badly done to as you can see from the pictures.

The Audio Note Conquest will go through several checks before being powered on. After that, it will go through some burn-in test before being passed back to the original owner.

Due to the busy schedule we have, we shall be limiting our modification and repair services to focus on our core business. Apologies for not taking in all work from now onwards. This may be our last repair and modifications service job unless there are some that are really worth our attention for analysis or study purposes.

J&K Audio Design
1/7/2015

Product Lists  

Level 0

Level 3: depends on type, size and complexity. Email us for details.
Iso-trans: link 1, link 2
* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.  
* Our product lines are always improving and increasing. If you do not see what you want, contact us!  
* Please email for volume discounts, distributor and OEM pricing.

Search This Blog

Product Lists

Product Lists

Level 0: link 1

Level 1: link 1, link 2, link 3, link 4

Level 2: link 1, link 2, link 3, link 4, link 5, link 6, link 7, Link 8, link 9

Level 3: depends on type, size and complexity. Email us for details.

Iso-trans: link 1, link 2

Power-trans: link 1

* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.

* Our product lines are always improving and increasing. If you do not see what you want, contact us!

* Please email for volume discounts, distributor and OEM pricing.